Listing is for SAMFG's custom designed and 3D printed dovetail helmet bridge "Nightwatch" only. All mounting screws, nuts and alan keys are included. Pictured Sionyx cameras and helmet are NOT included.
This bridge is designed for a BINOCULAR setup, which requires 2 Sionyx cameras (not included). Monocular setup is a separate listing.
KIT2: [PRO] Bridge and 2x lens shields. KIT3: [PREMIUM] Bridge, 2x lens shields, and 2x eyecups.
Kits are printed using ultra-strong Carbon Fiber infused PETG plastic in high-end prosumer grade printers. CFPETG plastic is impact resistant, temperature resistant and chemical resistant. Our eyecups are 3D printed with soft TPU.
Guide rods (stainless steel) and screw utilize metal-on-metal bearings/bushings for a lifetime of service. Each cam mounting plate has pupillary distance (PD) thumb adjuster. Each cam mounting plate also has tether holes to prevent the camera from falling to the ground, should it get dislodged from the helmet mount. Dovetails will now be printed with Carbon Fiber infused NYLON, for more strength and durability.
Pupillary Distance (PD): 62.5mm - 80mm. These have been tested with various mounts from Wilcox and Norotos as well as bump and ballistic FAST/ACH/MICH helmets. You can substitute in a metal Wilcox dovetail shoe (not included), such as the 14003G01 or similar for added strength which can be found at various online stores. All Sionyx Current (2021) Aurora Cameras (including Standard, Sport, Black and Pro).
Each cam mounting plate easily screws in to the camera mounting holes on the bottom of the Sionyx cams. Finger tightening may be enough for most uses, but we recommend tightening it with a screw driver for added security. PD adjustments may be tight when new, but will loosen up a little with use. We added the springs on the guide rod and screws to improve this tightness to prevent changes in PD with use.
Attach helmet tethers to each mounting plate to further secure the cams from dislodgement from the helmet mount itself. Springs can be removed to further decrease the PD.
Your Sionyx camera must be setup for helmet use. Video mode, EIS [OFF], FPS [30], Resolution [720p], and HDR [ON]. Set EVF Time Out to [NEVER].
Zoom in to 1:1 with 3 clicks (4-way buttons). Adjust viewfinder illumination as needed. Not affiliated or endorsed by Sionyx, Wilcox or Norotos. SAMFG Sionyx Bridge was designed and built for training, sports (airsoft), LARPING (Live Action Role Playing), reenactments and night-time bird watching. Not recommended for military or professional security use.
SAMFGLLC is not responsible for misuse or injury resulting from misuse of its products. Play stupid games, win stupid prizes. There may be some very minor surface blemishes, which is common with 3D printing and in no way effects functionality or strength.
Please understand this before purchasing. Color of screws and plastic may vary depending on our suppliers and materials on hand. Everything is proudly designed and made in the United States. The item "Nightwatch Sionyx Aurora Binocular Bridge Helmet Night Vision NVG Mount" is in sale since Monday, February 15, 2021. This item is in the category "Sporting Goods\Hunting\Scopes, Optics & Lasers\Night Vision Optics".
The seller is "spectrumadvmfg" and is located in Westminster, California. This item can be shipped to United States.
- Type: Helmet Mount
- MPN: Does Not Apply
- Brand: Unbranded