Error message
The Foundation framework and icons could not be found.
In order to use the Mundus theme, you must download the framework:
Click here
and extract it to
sites/all/libraries/foundation
Additional you need to download Foundation icons:
Click here
and extract it to
sites/all/libraries/foundation_icons_all
You are here
intensifier
MX-10130 Gen 3 Image Intensifier Tube predominately used in the PVS-7 B/C/D Monotube Goggle. Green Phosphor, non-gated, Built from new componenents by Elbit subcontractor. Min 64 lp, 21 S:N.
The tube is very useable at night, great performance. Hard to get ahold of these, supply has dwindled. This is a great alternative for building your own, keeping cost in check. Tube prices are stupid and it is going to get worse.
After talking to Elbit and L3, the days of cheaper tubes may be over. The pictures are part of the description. Keep in mind there is no export of this type equipment ...
Hard to find new ITT power supplies. These are non gated, 10160 power supplies. Will work with most ITT 10160 and 11769 tube modules.
They have some shelf wear from being moved around. There are 4 solder contacts for the wires. At least 3 of the contacts have small wires attached. All power supplies are new/tested/working.
These are easy to break if you dont know what you are doing. So, please know what you are doing, or have someone install this for you. If it doesn't work, YOU broke it. It is illegal to export without proper paperwork. This item is in the category "Sporting ...
Used tube with low amount of hours. Specifically a OMNI VII Contract tube. Gain fL/fc- 50,000-80,000. Halo (mm)- 0.70.
Additional Info about the tube. Originally the pigtail was missing, so a brand new one was soldered to the tube. Manual gain now functions as it should. Actual tube is clean, with almost no peppering present, no blems of any kind present in any region of the tube.
The only problem is 2 light streaks on the left side of the tube in zone 3 extending maybe a third of the way into zone 2. They may be a bit annoying at first, but you can totally ignore them if you...
These power supplies will work with most ITT 10160 and 11769 tube modules. They have some shelf wear from being moved around. There are 4 solder contacts for the wires. At least 3 of the contacts have small wires attached. All power supplies are new/tested/working.
These are easy to break if you dont know what you are doing. So, please know what you are doing, or have someone install this for you. If it doesn't work, YOU broke it. The item "NEW Power supply for 11769 Image Intensifier Tube Night Vision ITT NVG PSU" is in sale since Thursday, November 4, 2021.
This item is in the ...
This listing is for one used, non working, no intensifier tube. ATN PS7-3P Goggles, w/ headset assy, no intensifier tube. Please read and examine pictures carefully. This unit has no intensifier tube. You can see the photos that show a sample unit disassembled so you can see that the electronics are there. I've included a brand new headset assembly as well. Make sure you know what you're getting. Thanks for stopping with us. The item "ATN PS7-3P Goggles, with headset assy, no intensifier tube" is in sale since Tuesday, November 16, 2021. This item is in the category "Sporting ...
Image Intensifier ITT 10160C autogated. You get the tube in pic. It is illegal to export without proper paperwork. The item "Image Intensifier Tube 10160 11769 PVS AVS 14 6 9 night vision nvg" is in sale since Tuesday, October 19, 2021. This item is in the category "Sporting Goods\Hunting\Scopes, Optics & Lasers\Night Vision". The seller is "tomtomjr" and is located in Midlothian, Texas. This item can be shipped to United States.
Brand: None
Type: Image Intensifier
Night Vision Device Type: Monocular
MPN: Does Not Apply
Image Intensifier ITT 10160A style. It is illegal to export without proper paperwork. The item "Image Intensifier Tube lot PAIR 10160 11769 PVS AVS 14 6 9 night vision nvg" is in sale since Thursday, October 21, 2021. This item is in the category "Sporting Goods\Hunting\Scopes, Optics & Lasers\Night Vision".
The seller is "tomtomjr" and is located in Midlothian, Texas. This item can be shipped to United States.
Brand: None
Type: Image Intensifier
Night Vision Device Type: Monocular
MPN: Does Not Apply
These power supplies will work with most ITT 10160 and 11769 tube modules. They have some shelf wear from being moved around. There are 4 solder contacts for the wires. At least 3 of the contacts have small wires attached.
All power supplies are new/tested/working. These are easy to break if you dont know what you are doing. So, please know what you are doing, or have someone install this for you. If it doesn't work, YOU broke it. The item "NEW Power supply for 10160 11769 Image Intensifier Tube Night Vision ITT NVG PSU" is in sale since Thursday, September 16, 2021. This item is in ...
Image intensifier USA NVG Night Vision ANVIS 6/9 PVS14 10160. Very recent production as noted in pics.
Nice clear image, very minor black spot. The item "ITT Exelis Image intensifier USA NVG Night Vision ANVIS 6/9 PVS14 10160 Omni 8" is in sale since Wednesday, September 15, 2021.
This item is in the category "Sporting Goods\Hunting\Scopes, Optics & Lasers\Night Vision Optics". The seller is "livinlife4me" and is located in Cochran, Georgia. This item can be shipped to United States.
Brand: ITT
Type: Image Intensifier
Generation: Generation 3
MPN: 10160c
Image intensifier USA NVG Night Vision ANVIS 6/9 PVS14 10160. Very recent production, probably Omni 7/8.
Nice clear image, but as depicted in the photo, this one has a couple cosmetic blems, or black spots. The item "ITT Exelis is Image intensifier USA NVG Night Vision ANVIS 6/9 PVS14 10160" is in sale since Monday, September 6, 2021. This item is in the category "Sporting Goods\Hunting\Scopes, Optics & Lasers\Night Vision Optics". The seller is "livinlife4me" and is located in Cochran, Georgia.
This item can be shipped to United States.
Brand: ITT
Type: Image Intensifier
...
Pages