Visionking HD Digital zoom 3.5x Night Vision Goggle NVG-G1 Hunting Tactical new. 1x Night vision binoculars device. Connecting hole for Head Strap 10. Record MOV file in TF Card storage. Playback media file from TF Card storage.
Excternal power supply - Dc. USB cable/TF card/ Bag/Manua/Head Strap. Open battery cover and install the 2pcs CR123A batteries, being sure to follow the polarity markings inside the battery. Please pay attention to the direction of the battery. Inserting / Removing the TF card. Insert the TF card into the TF card port and push until it locks in place. To remove the installed TF card, please push the TF card inward to release it.
Storage capacity: 8GB or above is recommended. Note: The device will show " Please insert SD card" if the TF card is not installed. Turning On/ off the Night vision Goggle. For about 3 seconds to turn on the night vision goggle. Again for about 3 seconds to turn off the night vision goggle. Short press: short press this button to switch between video/playback/and menu. In video mode: Press to take video. In playback mode: Press to Play or stop play the video. In Menu mode: Press to select.
In video mode: Press to zoom out. In playback mode: Press to delete or protection the video. In menu mode: Press to select the next menu listing. In Video mode: Press to turn on the infrared light. In playback mode: Press to select the next video.
In menu mode: Press to select the previous menu listing. Button and select the video mode. The icon appear in the top left corner of the screen. It means you enter the video function.
Press the [SNAP] button to start recording video and press the [SNAP] button again to stop recording. Short press the [POWER] button and select playback mode. Press[SNAP]to play the video. In playback mode, press the [ZOOM] button to select delete or protection the video. Target the object you would like to view and turn the focus wheel located just below the objective lens. Until the image on the screen is sharp and clear. The focusing wheel is No.
9 in Parts overview picture. Icon displaying that you are in Video Mode.
Brightness of IR from 1 to 3(while plugging in USB power supply the IR brightness from 1 to 5). Using IR light in darkness. This device can be used in complete darkness when using the built in IR (infrared) light. Press the [IR] button to activate the infrared light. Remove the IR Lens cover and press the [IR] button to select between the 3 levels of brightness.
While plugging in USB power supply the IR brightness from 1 to. Transmitting stored videos and photos to a computer. Using a USB cable, you can connect the night vision binoculars device to a computer.
You can find the stored photo/video files on the computer by looking under "My computer \ removable disk". Once the removable disk is selected, you can view, delete, move, or copy any video. Clean the device only with a dry or slightly damp, lint-free cloth. Do not use abrasive cleaners to clean the device. This device is a high-precision optical instrument, so in order to avoid damage, please avoid the following practice. Use the device in ultra-high or ultra-low temperature. Keep it or use it in moist environment for long. Deliver or use it in strongly shocking environment. Note: Remove the batteries from the device if it is not used for a longer time. We accept return within 30 days after consumer receive item. We are Visionking Optical Technology CO. We are professional optical products supplier, including Binoculars, Monocular, Rifle scope, range finder, night vision, astronomy telescope and many accessories. Our trade mark "visionking" has been registered in EU(European Union). Any questions and needs, please send message to us. If you are interestin in our products, please Check out my.