READ - Unit has an edge glow in dark environments - see images. Used Litton M890 Generation 3 MX-10160 Night Vision Image Intensifier. Tube has minor peppering & an edge glow. Only includes what is seen in images, housing not included!   

New Elbit 9415 XLSH with original data sheet. These can be used in many night vision systems.   

New Old Stock MX-10160A/AVS-6 image intensifier tube. Only used for testing functionality - has less than an hour total runtime. Mostly clean tube, has a very small bit of peppering - see photos - but not noticeable during normal use.   

   Offer is the very rare vintage ITT image intensifier tube super large size 75mm diameter. I'm not sure about the model print label ITT Electro Optical Division on the acrylic housing is correct or not, model 41x0?? I can't see clear and read the model number due to the print label worn out. Both input and output are thick fiber optic faceplate, both are 75mm diameter, proximity focus, it seems the photocathode is the S25 type base on the violet material surface. This is the Gen 1 type, very high resolution, image display line pattern test is perfect, no distortion. It can be used ...

Generation 3 Elbit PH spec White Phosphorous image intensifiers. These are auto gating so no pigtails will be necessary to build. Will be perfect to build out a PVS14 or a set of binoculars. Looking to move some out of my personal stock. All are crisp tubes with no blems/ burn ins. Message me if you have any further questions.   

   Dual-screen binocular glasses naked-eye 3D display technology restores the real three-dimensional scene seen by the human eye (the patent for naked-eye 3D night vision devices has been authorized in various countries). Built-in 1.4-inch 390390 dual screen, display 7-level brightness adjustment. Fully independent binocular technology, can independently adjust the left and right eye vision compensation (refractive adjustment range +/-3.5, both myopia, farsightedness 350 adjustment compensation), 7 times magnification. 250m300m full black observation distance, 1minfinity low light ...

Electrophysics IR Goggles Head-mounted IR viewer Night Vision with Image Intensifiers. Slight Rip on the plastic head Mount but Works Fine. Great Deal with original Image Intensifiers.   

MX-10130 Gen 3 Image Intensifier Tube predominately used in the PVS-7 B/C/D Monotube Goggle. Min 64 lp, 21 S:N. The tube is very useable at night, great performance. Hard to get ahold of these, supply has dwindled. This is a great alternative for building your own, keeping cost in check. Tube prices are stupid and it is going to get worse. After talking to Elbit and L3, the days of cheaper tubes may be over. The pictures are part of the description. Keep in mind there is no export of this type equipment without State Department approval. Don't go to jail.   

MX-10130 Gen 3 Image Intensifier Tube predominately used in the PVS-7 B/C/D Monotube Goggle. Green Phosphor, non-gated, 3-mil dot Zone 1, very useable. Built from new components by Elbit sub-contractor. Min 64 lp, 21 S:N. Hard to get ahold of these, supply has dwindled. This is a great alternative for building your own, keeping cost in check. Tube prices are stupid and it is going to get worse. After talking to Elbit and L3, the days of cheaper tubes may be over. The pictures are part of the description. Keep in mind there is no export of this type equipment without State Department ...

MX-10130 Gen 3 Image Intensifier Tube predominately used in the PVS-7 B/C/D Monotube Goggle. The tube is very useable at night, great performance. Hard to get ahold of these, supply has dwindled. This is a great alternative for building your own, keeping cost in check. Tube prices are stupid and it is going to get worse. After talking to Elbit and L3, the days of cheaper tubes may be over. The pictures are part of the description. Keep in mind there is no export of this type equipment without State Department approval. Don't go to jail.