New Old Stock MX-10160A/AVS-6 image intensifier tube. Only used for testing functionality - has less than an hour total runtime. Mostly clean tube, has a very small bit of peppering - see photos - but not noticeable during normal use.   

   Offer is the very rare vintage ITT image intensifier tube super large size 75mm diameter. I'm not sure about the model print label ITT Electro Optical Division on the acrylic housing is correct or not, model 41x0?? I can't see clear and read the model number due to the print label worn out. Both input and output are thick fiber optic faceplate, both are 75mm diameter, proximity focus, it seems the photocathode is the S25 type base on the violet material surface. This is the Gen 1 type, very high resolution, image display line pattern test is perfect, no distortion. It can be used ...

Generation 3 Elbit PH spec White Phosphorous image intensifiers. These are auto gating so no pigtails will be necessary to build. Will be perfect to build out a PVS14 or a set of binoculars. Looking to move some out of my personal stock. All are crisp tubes with no blems/ burn ins. Message me if you have any further questions.   

Electrophysics IR Goggles Head-mounted IR viewer Night Vision with Image Intensifiers. Slight Rip on the plastic head Mount but Works Fine. Great Deal with original Image Intensifiers.   

MX-10130 Gen 3 Image Intensifier Tube predominately used in the PVS-7 B/C/D Monotube Goggle. Min 64 lp, 21 S:N. The tube is very useable at night, great performance. Hard to get ahold of these, supply has dwindled. This is a great alternative for building your own, keeping cost in check. Tube prices are stupid and it is going to get worse. After talking to Elbit and L3, the days of cheaper tubes may be over. The pictures are part of the description. Keep in mind there is no export of this type equipment without State Department approval. Don't go to jail.   

MX-10130 Gen 3 Image Intensifier Tube predominately used in the PVS-7 B/C/D Monotube Goggle. The tube is very useable at night, great performance. Hard to get ahold of these, supply has dwindled. This is a great alternative for building your own, keeping cost in check. Tube prices are stupid and it is going to get worse. After talking to Elbit and L3, the days of cheaper tubes may be over. The pictures are part of the description. Keep in mind there is no export of this type equipment without State Department approval. Don't go to jail.   

MX-10130 Gen 3 Image Intensifier Tube predominately used in the PVS-7 B/C/D Monotube Goggle. Green Phosphor, non-gated, Built from new componenents by Elbit subcontractor. Min 64 lp, 21 S:N. The tube is very useable at night, great performance. Hard to get ahold of these, supply has dwindled. This is a great alternative for building your own, keeping cost in check. Tube prices are stupid and it is going to get worse. After talking to Elbit and L3, the days of cheaper tubes may be over. The pictures are part of the description. Keep in mind there is no export of this type equipment ...

Hard to find new ITT power supplies. These are non gated, 10160 power supplies. Will work with most ITT 10160 and 11769 tube modules. They have some shelf wear from being moved around. There are 4 solder contacts for the wires. At least 3 of the contacts have small wires attached. All power supplies are new/tested/working. These are easy to break if you dont know what you are doing. So, please know what you are doing, or have someone install this for you. If it doesn't work, YOU broke it. It is illegal to export without proper paperwork. This item is in the category "Sporting ...

   Used tube with low amount of hours. Specifically a OMNI VII Contract tube. Gain fL/fc- 50,000-80,000. Halo (mm)- 0.70. Additional Info about the tube. Originally the pigtail was missing, so a brand new one was soldered to the tube. Manual gain now functions as it should. Actual tube is clean, with almost no peppering present, no blems of any kind present in any region of the tube. The only problem is 2 light streaks on the left side of the tube in zone 3 extending maybe a third of the way into zone 2. They may be a bit annoying at first, but you can totally ignore them if you...

These power supplies will work with most ITT 10160 and 11769 tube modules. They have some shelf wear from being moved around. There are 4 solder contacts for the wires. At least 3 of the contacts have small wires attached. All power supplies are new/tested/working. These are easy to break if you dont know what you are doing. So, please know what you are doing, or have someone install this for you. If it doesn't work, YOU broke it. The item "NEW Power supply for 11769 Image Intensifier Tube Night Vision ITT NVG PSU" is in sale since Thursday, November 4, 2021. This item is in the ...